AVRT Config

No tracker connected

A newer version of AVRT Config is ready.

APRS

Web Serial is not available in this browser, or it is disabled. Please use a current browser with Web Serial enabled, such as Firefox, Chrome, Edge, or Vivaldi, to connect to an AP510 tracker.

Step 1

Connect to the AP510

Use Connect to choose the serial port in the browser.

Pending changes

Field	Current	New

Diagnostics

Activity

Templates

Read a tracker, apply a template, and write the result. Settings marked “Keep from tracker” remain unchanged.

Template

Select template

Create a template from Configure after reading a tracker.

No template selected

Choose a template above to review its settings.

Manage templates

Import, export, or remove templates stored in this browser.

Template

Name Description

Step 1

Choose a template

Select a template, then read the connected tracker.

Devices written

No trackers written with this template yet.

Template actions

Help

Contents

Use at your own risk

This software can modify the configuration stored in your AP510 tracker. Incorrect settings, communication failures, interrupted writes, or incompatible firmware may cause the tracker to malfunction or become unusable.

Make sure you have a backup of the original configuration before writing changes. The software is provided without warranty, and the author accepts no responsibility for damage, data loss, or a bricked tracker.

Only proceed if you understand and accept these risks.

Save as template

Values in this template will be applied to future trackers. Callsign and SSID are kept from each tracker by default.

Name Description

Keep from tracker